Quick Setup Instructions for RF Acquisition
OL-31980-01
13
Quick Setup Instructions for RF Acquisition
1
Press
MENU
to display the Main menu.
2
Press to go to the Setup menu. Press
SELECT
. Press
to move to the TS Input
menu. Press
SELECT
.
3
To setup the ASI input port, go to step 4. To setup the RF1 input port, go to step
5.
4
Press
SELECT
three times. Press to set the ASI port to Act (Activate). Press
SELECT
. Go to step 11.
5
Press
SELECT
. Press
to go to RF1. Press
SELECT
twice. Use to set the RF1
port parameter to Act (Activate). Press
SELECT
.
6
Press
to move to the LO1, LO2, Crossover menu. Verify these parameters for
your application. If no change is needed, go to Step 7. If required, you may
modify these settings. Use
to move to the parameter that you want to modify.
Press
SELECT
. Use the numerical keypad to enter new frequencies. Press
SELECT
.
7
Press
five times to move to the Modulation and Rolloff menu. Press
SELECT
.
Use to choose DVB-S or DVB-S2. Press
SELECT
. If DVB-S2 is used, press
to
choose Rolloff. Press
SELECT
. Use to choose the value. Press
SELECT
.
8
Press to move to the Freq., Sym Rate, and FEC menu. Press
SELECT
. Enter the
RF frequency. Press
SELECT
. Press
to move to the Sym. Rate menu. Press
SELECT
. Enter the symbol rate. Press
SELECT
. If DVB-S2 is used, proceed to
step 9. If DVB-S is used, press
to set up the FEC. Press
SELECT
. Use
to
select AUTO. Press
SELECT
.
9
Press twice to move to the Net ID menu. Press to choose Net ID. Press
SELECT
. Enter the value. Press
SELECT
.
10
Press . Press
SELECT
. Use to change the LNB power, if needed. Only the
RF1 port is capable of providing 13V or 18V. Press
SELECT
.
11
Press
MENU
three times. Press
to move to Save & Exit. Press
SELECT
. Save &
Exit will return you to the Main: Setup menu; Abandon & Exit will go back to the
last menu accessed with the original parameters; Cancel will go back to the last
menu accessed with changes saved.
12
The transcoder will search for the signal and display “Acquisition Successful." It
will find the first available channel on the network. Press
MENU
twice to return
to the start-up menu.
