2-27
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06
Chapter 2 Cabling and Troubleshooting the CSS
Connecting the Power Cord
3.
Plug the power cord into a dedicated 3-wire grounding receptacle.
4.
To power on the CSS, see the
“Powering Up the CSS”
section.
Connecting a CSS 11503 Power Cord
The following sections provide information on:
•
Connecting a CSS 11503 AC Power Cord
•
Connecting a CSS 11503 DC Power Cord
Connecting a CSS 11503 AC Power Cord
To connect an AC power cord to a CSS 11503:
1.
At the rear of the chassis, ensure that the CSS power switch is in the O (off)
position.
2.
Plug the AC power cord connector into the CSS power connector, as shown
in
Figure 2-12
.
Figure 2-12 Connecting a CSS 11503 AC Power Cord
1
Power switch
2
AC power connector
100-240V
~
50-60 Hz
5A
430 W
59543
2
1
