1-27
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06
Chapter 1 Unpacking and Installing the CSS
Installing a CSS Module
8.
Optionally, you can install the PCMCIA cover to the front of the disk slots
and secure it with its two spring-loaded screws, as shown in
Figure 1-9
. The
cover protects the disks in the SCM.
Figure 1-9
Installing a PCMCIA Cover on an SCM
9.
Reboot the CSS to initialize the passive SCM.
10.
To copy the boot configuration from the active SCM to the passive SCM, use
the passive sync command in boot configuration mode. For more
information, refer to the Cisco Content Services Switch Administration
Guide.
59602
CSS5-SCM-2GE
System Contr
ol
DUPLEX
LINK/ACT
MANAGEMENT
10BASE-T
SLOT 0
SLOT 1
GE 1
GE 2
LINK
LINK
STATUS
PCMCIA
CONSOLE