5-2
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 5 Cisco M190 Content Security Management Appliance
Status LEDs and Buttons for Maintenance
Status LEDs and Buttons for Maintenance
•
•
Rear Panel LEDs and Buttons, page 5-4
Front Panel LEDs
shows the front panel LEDs.
defines the LED states.
Figure 5-2
Cisco M190 Content Security Management Appliance Front Panel LEDS
1
Hard drive fault LED
6
Fan status LED
2
Hard drive activity LED
7
Temperature status LED
3
Power button/power status LED
8
Power supply status LED
4
Identification button/LED
9
Network link activity LED
5
System status LED
Table 5-1
Front Panel LEDs, Definitions of States
LED Name
State
1
Hard drive fault
•
Off—The hard drive is operating properly.
•
Amber—Drive fault detected.
•
Amber, flashing—The device is rebuilding.
•
Amber, flashing with one-second interval—Drive locate function activated.
2
Hard drive activity
•
Off—There is no hard drive in the hard drive tray (no access, no fault).
•
Green—The hard drive is ready.
•
Green, flashing—The hard drive is reading or writing data.