6-5
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 6 Cisco M390 Content Security Management Appliance
Summary of Features
Summary of Features
lists the features of the M390 Content Security Management Appliance.
.
Data/Management port link status
•
Off—No link is present.
•
Green—Link is active.
•
Green, flashing—Traffic is present on the active link.
Rear unit identification
•
Off—The unit identification LED is not in use.
•
Blue—The unit identification LED is activated.
Table 6-2
Rear Panel LEDs, Definitions of States (continued)
LED Name
State
Table 6-3
Cisco M390 Content Security Management Appliance Features
Feature
Description
Chassis
One rack-unit (1RU) chassis
Processors
Two E5–2620 v3 processor
Memory
Two 8-GB DDR4-2133 DIMMs
RPC
Accessed through the 1-Gb dedicated port
Data ports
Five 1-Gb BASE-T Ethernet LAN ports
Management I/O
Supported connectors:
•
One 1-Gb BASE-T Ethernet LAN ports
•
One RS-232 serial port
Power
Two 770 W AC power supplies
Power
consumption
2626 BTU/hr
Cooling
Six fan modules for front-to-rear cooling
Storage
Six or eight 600 GB hard disk drives (2.5” 10K SAS 4Kn) are installed into
front-panel drive bays that provide hot-swappable access for SAS drives.
Note
The drives with the PID CCS-HDD-600GB-RV-A are 1.8 TB, but have
been partitioned to 600 GB of usable space.
Disk management
(RAID)
Dedicated internal riser for a PCIe-style Cisco modular RAID controller card
