Cisco CSA 90 Series, Installation And Maintenance Manual

Page: 30 / 112

2-4
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 2 Cisco C190 Email Security Appliance
Summary of Features
•
Unit identification button/LED—Located to the right of the VGA video port (DB-15).
Table 2-2 defines the LED states.
Summary of Features
Table 2-3 lists the features of the C190 Email Security Appliance.
.
Table 2-2 Rear Panel LEDs, Definitions of States
LED Name State
Power supply status
•
Off—No AC input (12 V main power off, 12 V standby power off).
•
Green, flashing—12 V main power off; 12 V standby power on.
• Green—12 V main power on; 12 V standby power on.
•
Amber, flashing—Warning detected but 12 V main power on.
• Amber—Critical error detected; 12 V main power off.
Data/Management port link speed • Off—Link speed is 10 Mbps.
•
Amber—Link speed is 100 Mbps.
• Green—Link speed is 1 Gbps.
Data/management port link status
•
Off—No link is present.
• Green—Link is active.
•
Green, flashing—Traffic is present on the active link.
Rear unit identification
•
Off—The unit identification LED is not in use.
• Blue—The unit identification LED is activated.
Table 2-3 Cisco C190 Email Security Appliance Features
Feature Description
Chassis One rack-unit (1RU) chassis
Processors One E5–2609 v3 processor
Memory One 8-GB DDR4-2133 DIMM
RPC Accessed through the 1-GB dedicated port
Data Ports Two 1-GB BASE-T Ethernet LAN ports; also used as management ports
Management I/O Supported connectors:
• One 1-Gb BASE-T Ethernet LAN ports
•
One RS-232 serial port
Power One or two 770 W AC power supplies
Power
consumption 1313 BTU/hr or 2626 BTU/hr
Cooling Six fan modules for front-to-rear cooling