1-11
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 1 Install Cisco x90 Series Content Security Appliances
Install Cisco x90 Series Content Security Appliances In a Rack
Step 5
Open the hinged flap at the top of each plastic cable guide and route your cables through the cable guides
as desired.
Figure 1-6
Attach the Cable Management Arm to the Rear of the Slide Rails
Reverse the Cable Management Arm (Optional)
Step 1
Rotate the entire CMA assembly 180 degrees. The plastic cable guides must remain pointing upward.
Step 2
Flip the tabs at the end of each CMA arm so that they point toward the rear of the appliance.
Step 3
Pivot the tab that is at the end of the width-adjustment slider. Depress and hold the metal button on the
outside of the tab and pivot the tab 180 degrees so that it points toward the rear of the appliance.
1
CMA tab on arm farthest from the appliance
and end of stationary outer slide rail
3
CMA tab on width-adjustment slider and end
of stationary outer slide rail
2
CMA tab on arm closest to the appliance and
end of inner slide rail attached to the
appliance
4
Rear of the appliance
352584
1
4
2
3
