Cisco CSA 90 Series, Installation And Maintenance Manual

Page: 50 / 112

5-4
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 5 Cisco M190 Content Security Management Appliance
Summary of Features
Rear Panel LEDs and Buttons
The rear panel has the following LEDs and buttons that can be used to maintain the appliance:
•
Data/management port link speed LED—Located to the left of each data or management port.
• Data/management port link status LED—Located to the right of each data or management port.
•
Unit identification button/LED—Located to the right of the VGA video port (DB-15).
Table 5-2 defines the LED states.
Summary of Features
Table 5-3 lists the features of the M190 Content Security Management Appliance.
.
Table 5-2 Rear Panel LEDs, Definitions of States
LED Name State
Data/Management port link speed • Off—Link speed is 10 Mbps.
•
Amber—Link speed is 100 Mbps.
•
Green—Link speed is 1 Gbps.
Data/management port link status • Off—No link is present.
•
Green—Link is active.
• Green, flashing—Traffic is present on the active link.
Rear unit identification
•
Off—The unit identification LED is not in use.
•
Blue—The unit identification LED is activated.
Table 5-3 Cisco M190 Content Security Management Appliance Features
Feature Description
Chassis One rack-unit (1RU) chassis
Processors One E5–2609 v3 processor
Memory One 8-GB DDR4-2133 DIMM
RPC Accessed through the 1-Gb dedicated port
Data ports Two 1-Gb BASE-T Ethernet LAN ports; also used as management ports
Management I/O Supported connectors:
•
One 1-Gb BASE-T Ethernet LAN ports
•
One RS-232 serial port
Power One or two 770 W AC power supplies
Power
consumption 1313 BTU/hr or 2626 BTU/hr
Cooling Six fan modules for front-to-rear cooling