6-15
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-04
Chapter 6 Using EAP Authentication
Using PEAP
OTP Databases Only
Step 1
If your computer is running Windows XP, a pop-up message appears above the Windows system tray
informing you that you need to select a certificate or other credentials to access the network. Click this
message.
Step 2
If a message appears indicating the root certification authority for the server’s certificate and it is the
correct certification authority, click OK to accept the connection. Otherwise, click Cancel.
Step 3
If a message appears indicating the server to which your client adapter is connected and it is the correct
server to connect to, click OK to accept the connection. Otherwise, click Cancel.
Step 4
Perform one of the following:
•
If your computer is running Windows 2000 (with Service Pack 3 and the Windows 2000 Wireless
802.1X hot fix), the One Time Password screen appears (see
Figure 6-11
).
•
If your computer is running Windows XP, a pop-up message appears above the Windows system tray
prompting you to process your logon information for your wireless network. Click this message. The
One Time Password screen appears (see
Figure 6-11
).
Figure 6-11 One Time Password Screen
Step 5
Enter your PEAP authentication username in the User Name field.
Step 6
Select either the Hardware Token or Software Token option. If you select the Software Token option,
the Password field on the One Time Password screen changes to the PIN field.
Note
The Hardware Token and Software Token options are available only if you selected both of
them on the Generic Token Card Properties screen during configuration. Otherwise, only the
option you selected will be available.
Step 7
Enter either your hardware token password or your software token PIN.
Step 8
Click OK. The client adapter should now EAP authenticate.
