5-36
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-04
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Figure 5-7
Wireless Network Connection Properties Screen (Authentication Tab)
Step 7
Select the Enable network access control using IEEE 802.1X check box.
Step 8
Perform one of the following, depending on the authentication type you want to use:
•
If you are planning to use EAP-TLS, go to the
“Enabling EAP-TLS”
section below.
•
If you are planning to use EAP-MD5, go to the
“Enabling EAP-MD5” section on page 5-37
.
•
If you are planning to use PEAP, go to the
“Enabling PEAP” section on page 5-38
.
•
If you are planning to use EAP-SIM, go to the
“Enabling EAP-SIM” section on page 5-40
.
Enabling EAP-TLS
Follow the steps below to enable EAP-TLS.
Step 1
For EAP type, select Smart Card or other Certificate.
Step 2
Click Properties. The Smart Card or other Certificate Properties screen appears (see
Figure 5-8
).
