7-36
Catalyst 2360 Switch Software Configuration Guide
OL-19808-01
Chapter 7 Configuring Switch-Based Authentication
Configuring the Switch for Secure Socket Layer HTTP
To return to the default SSH control parameters, use the
no ip ssh
{
timeout
|
authentication-retries
}
global configuration command.
Displaying the SSH Configuration and Status
To display the SSH server configuration and status, use one or more of the privileged EXEC commands
in
For more information about these commands, see the
“
Secure Shell Commands
”
section in the “Other
Security Features” chapter of the
Cisco IOS Security Command Reference, Cisco IOS Release 12.2,
at
this URL:
Configuring the Switch for Secure Socket Layer HTTP
This section describes how to configure Secure Socket Layer (SSL) Version 3.0 support for the
HTTP 1.1 server and client. SSL provides server authentication, encryption, and message integrity, as
well as HTTP client authentication, to allow secure HTTP communications.To use this feature, the
cryptographic (encrypted) software image must be installed on your switch. You must obtain
authorization to use this feature and to download the cryptographic software files from Cisco.com. For
more information about the cryptographic image, see the release notes for this release.
These sections contain this information:
•
Understanding Secure HTTP Servers and Clients, page 7-37
•
Configuring Secure HTTP Servers and Clients, page 7-39
•
Displaying Secure HTTP Server and Client Status, page 7-43
For configuration examples and complete syntax and usage information for the commands used in this
section, see the “HTTPS - HTTP Server and Client with SSL 3.0” feature description for Cisco IOS
Release 12.2(15)T at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a008015a4c6.
html
Step 6
show ip ssh
or
show ssh
Show the version and configuration information for your SSH server.
Show the status of the SSH server connections on the switch.
Step 7
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Table 7-2
Commands for Displaying the SSH Server Configuration and Status
Command
Purpose
show ip ssh
Shows the version and configuration information for the SSH server.
show ssh
Shows the status of the SSH server.
