Cisco BPX 8600 Series, Installation And Configuration Manual

Page: 427 / 630

24-15
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 24 Configuring BXM Virtual Circuits
BXM SVC Resource Partitioning
Example: BXM cnfport Command
ins-bpx6 TN SuperUser BPX 15 9.3 Sep. 24 2000 07:37 GMT
Port: 13.1 [ACTIVE ]
Interface: LM-BXM
Type: UNI %Util Use: Disabled
Speed: 353208 (cps)
Shift: SHIFT ON HCF (Normal Operation)
SIG Queue Depth: 640
Protocol: NONE
SVC Channels: 1000
SVC VPI Min: 0
SVC VPI Max: 10
SVC Bandwidth: 300000 (cps)
This Command: cnfport 13.1
NNI Cell Header Format? [N]:
Step 5
Configure the SVC Channels, SVC VPI Min, SVC VPI Max, and SVC Bandwidth as desired.
Step 6 Next you need to configure the SVC Port Queue depth with the cnfportq <portnum> command shown
in the following example.
Example: BXM cnfportq Command
ins-bpx6 TN SuperUser BPX 15 9.3 Sep. 24 2000 07:39 GMT
Port: 13.1 [ACTIVE ]
Interface: LM-BXM
Type: UNI
Speed: 353208 (cps)
SVC Queue Pool Size: 5000
CBR Queue Depth: 600
CBR Queue CLP High Threshold: 80%
CBR Queue CLP Low Threshold: 60%
CBR Queue EFCI Threshold: 80%
VBR Queue Depth: 5000 UBR/ABR Queue Depth: 20000
VBR Queue CLP High Threshold: 80% UBR/ABR Queue CLP High Threshold: 80%
VBR Queue CLP Low Threshold: 60% UBR/ABR Queue CLP Low Threshold: 60%
VBR Queue EFCI Threshold: 80% UBR/ABR Queue EFCI Threshold: 30%
This Command: cnfportq 13.1
SVC Queue Pool Size [5000]:
Step 7
Configure the SVC Queue Pool Size parameter to a value greater than 0 (zero); the default is 0 and
needs to be changed for SVCs to operate.
Step 8 Partition the SVC resources for every BXM which is to support ATM SVCs in the BPX switch.