Cisco BPX 8600 Series, Installation And Configuration Manual

Page: 34 / 630

Figures
xxxii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Figure 23-7 Resource Partitioning Between AutoRoute and VSI
23-18
Figure 23-8 Switch with Redundant Controllers to Support Master Redundancy
23-19
Figure 23-9 Service Template Overview
23-26
Figure 23-10 Service Template and Associated Qbin Selection
23-27
Figure 25-1 Typical ATM Hybrid Network using Virtual Trunks
25-3
Figure 25-2 Virtual and Physical Trunks on a BXM
25-5
Figure 25-3 BXM Egress VIrtual Interfaces and Qbins
25-6
Figure 25-4 Virtual Trunks across a Public ATM Network
25-7
Figure 25-5 ATM Virtual Trunk Header Types
25-9
Figure 25-6 Addition of Virtual Trunks Across a Public ATM Network
25-18
Figure 25-7 Virtual Trunks across a Cisco Wan Switching ATM Cloud
25-19
Figure 26-1 SONET Section, Line, and Path
26-3
Figure 26-2 APS 1+1 Redundancy
26-4
Figure 26-3 APS 1:1 Redundancy
26-4
Figure 26-4 APS 1+1 Redundancy, Installing APS Backcards in APS Redundant Backplane
26-6
Figure 26-5 SONET APS 1+1 Detail
26-7
Figure 26-6 SONET APS 1:1 Detail
26-11
Figure 27-1 Replication of a Root Connection into Three Leaves
27-4
Figure 27-2 Example of Traffic, One Root and Two Leaves
27-4
Figure 27-3 Adding Multicasting Connections
27-5
Figure 27-4 Multi-Segment Multicast Connections
27-6
Figure 27-5 Statistics Collection
27-6
Figure 28-1 Automatic Alarm Reporting
28-2
Figure 28-2 OAM Cells
28-14
Figure 28-3 Alarms
28-14
Figure 29-1 Network Loopback Paths
29-7
Figure 30-1 Unlatching the Air Intake Grille
30-3
Figure 30-2 Removing a Line Module
30-5
Figure 30-3 DC Power Entry Module with Conduit Box
30-6
Figure 30-4 AC Power Supply Assembly
30-7
Figure 30-5 Removing Blank Filler Panel (B side shown)
30-8
Figure 30-6 Card Slot and Fan Fuse Locations on System Backplane
30-11
Figure 33-1 Network Application
33-1
Figure 33-2 Front and Rear Panel Features
33-5
Figure C-1 B-ISDN Model
C-1