8-2
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-09
Chapter 8 Cisco ASR 1002 Router Overview and Installation
Cisco ASR 1002 Router Description
The Cisco ASR 1002 Router supports:
•
Cisco ASR1000-ESP5 or Cisco ASR1000-ESP10 as a field-replaceable unit (FRU)
•
The Cisco Embedded Route Processor which supports 2MB upgradeable BootROM and 8 GB eUSB
bulk storage.
•
1 + 1 redundant AC or DC power supplies.
•
Stratum-3 network clocking per GR-1244-CORE, with T1/E1 BITS interface or SPAs as timing
sources.
•
A built- in 4x1GE Interface providing four SFP based GE connections, designated as SPA bay 0.
The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly
and the power supply modules as field-replaceable units. The Cisco embedded ASR1000-SIP10 and
Cisco built-in ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the
shared port adapters in the SIP are field upgradable.
This section contains the following topics:
•
Front View, page 8-2
•
Rear View, page 8-3
•
Cisco ASR 1002 Router Slot Numbering, page 8-4
Front View
Figure 8-1
shows the Cisco ASR 1002 Router with modules installed.
Figure 8-1
Cisco ASR 1002 Router—Front View
Note
The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable
and the Cisco ASR 1000 Series Route Processor is embedded in the chassis and not field upgradeable.
1
Embedded ASR 1000 Series Route Processor
in the subslot and represents the built in 4xGE
SPA.
3
SPA subslot 1
2
SPA subslot 2
4
SPA subslot 3
ASR 1002
pwr
stat
min
maj
crit
STAT
QE0
QE1
BOOT
CARRIER
LINK
PWR
STAT
QE2
QE3
SPA-4XOC3-POS
ST
AT
US
0
1
2
3
C/A
A/
L
C/A
A/L
C/
A
A/L
C/
A
A/L
SPA-4XOC3-POS
ST
AT
US
0
1
2
3
C/
A
A/
L
C/
A
A/
L
C/
A
A/
L
C/
A
A/
L
SPA-4XOC3-POS
ST
AT
US
0
1
2
3
C/
A
A/
L
C/
A
A/
L
C/
A
A/
L
C/
A
A/
L
STBY
ACTV
STAT
ASR1000-ESP10
PWR
1
2
3
4
280369
