To manually initiate the transferring of bulk statistics prior to reaching the of the maximum configured storage
limit, enter the following Exec mode command:
bulkstats force transfer
Clearing Bulk Statistics Counters and Information
It may be necessary to periodically clear counters pertaining to bulk statistics in order to gather new information
or to remove bulk statistics information that has already been collected. The following Exec mode command
can be used to perform either of these functions:
clear bulkstats { counters | data }
The
clear bulkstats data
command clears any accumulated data that has not been transferred. This includes
any "completed" files that have not been successfully transferred.
Bulkstats Schema Nomenclature
This section describes the nomenclature associated with configuring and viewing bulkstats.
Statistic Types
The following statistic types are defined in the
Statistics and Counters Reference
user document (published
prior to Release 20.0) and displayed in the output of the Exec mode
show bulkstats variables
command"
•
Counter:
A counter records incremental data cumulatively and rolls over when the counter limit is
reached.
•
All counter statistics are cumulative and reset only by one of the following methods: roll-over
when the limit is reached, after a system restart, or after a clear command is performed.
•
The limit depends upon the data type.
•
Gauge:
A gauge statistic indicates a single value; a snapshot representation of a single point in time
within a defined time frame. The gauge changes to a new value with each snapshot though a value may
repeat from one period to the next. The limit depends upon the data type.
•
Information:
This type of statistic provides information, often intended to differentiate sets of statistics;
for example, a VPN name or IP address. The type of information provided depends upon the data type.
The following statistic types are included in the
Statistics and Counters Reference
spreadsheet published after
release 20.0 to replace the original user document:
•
Incremental:
An incremental data type records incremental data cumulatively and rolls over when the
counter limit is reached.
•
All incremental statistics are cumulative and reset only by one of the following methods: roll-over
when the limit is reached, after a system restart, or after a clear command is performed.
•
The limit depends upon the data type.
ASR 5500 System Administration Guide, StarOS Release 21.5
121
Bulk Statistics
Clearing Bulk Statistics Counters and Information