manualshive.com logo in svg

Cisco ASR 5500, System Administration Manual

The Cisco ASR 5500 is a cutting-edge networking solution that empowers businesses with exceptional performance and reliability. For hassle-free installation, our detailed Installation Manual is available for free download from manualshive.com, ensuring seamless setup and optimal usage. Get the most out of your product effortlessly.

Share
Download
background image

Function

Description

Task

The hwctrl task has several timers that manage polling loops for hardware
sensor readings, sensor threshold monitoring, and fan tray monitoring.

Hardware Controller

hwctrl

The hwmgr task runs on all cards in the chassis to read local accessible
hardware sensors and report them back to the hwctrl.

Hardware Manager

hwmgr

The subsystem responsible for starting most of the network services.

InterNET Service Daemon

inetd

Listens for requests from connecting clients, such as FTP, SFTP, and telnet.
When a TCP packet or UDP packet arrives with a particular destination
port number, inetd launches the appropriate server program to handle the
connection.

Note:

In release 20.0 and higher Trusted StarOS builds, FTP and Telnet

are not supported.

Started by SIT on system startup regardless of configuration.

IPSec Controller

ipsecctrl

Starts ipsecmgr tasks based on configuration and maintains its list for task
recovery.

Receives and maintains user configuration for IPSec.

Manages the configured IPSec crypto maps and its assignment to ipsecmgrs.

Interfaces with the vpnmgr task for required IPSec configuration parameters
such as IP Access Lists, IP pools, interface addresses, and interface state
notifications.

Created by the Session Controller, establishes and manages secure IKEv1,
IKEv2 and IPSec data tunnels.

IPSec Manager

ipsecmgr

Central key value store (kvstore) function that runs on the management
card. Its primary function is to support recovery and distribution functions.

Key Value Controller

kvctrl

Started by npuctrl on the demux card's primary MIO (ASR 5500) with a
facility level between CSP and npumgr to receive configuration/status
notification from npumgr and build global LAG database.

Link Aggregation Group
Manager

[ASR 5500 only]

lagmgr

Exchanges control packets (LACP and Marker) over configured physical
ports with peers to reach agreement on an aggregation of links.

Implements the Name Service and related functions for the internal message
passing system.

Messenger Daemon

msgd

The Messenger Proxy process handles broadcast messages send from any
single application (referred to as a client) to any facility which has one
instance per thread (referred to as the Target Facility).

Message Proxy

msgproxy

One msgproxy task runs on each CPU complex on the DPCs (ASR 5500)
and SF Virtual Machine (VPC-DI).

Processes incoming broadcast messages from the Client processes, such
as sessctrl, distributes them to the correct Target Facility, such as sessmgr,
creates the correct responses and sends them back to the correct Client.

ASR 5500 System Administration Guide, StarOS Release 21.5    

333

StarOS Tasks

Platform Processes

Summary of Contents for ASR 5500















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5500

ICP PAC-170 User Manual preview
PAC-170
Brand: ICP Pages: 19
3C-Link 3C-MC-R16 User Manual preview
3C-MC-R16
Brand: 3C-Link Pages: 6
IBM 3453 Series Customer Install Manual preview
3453 Series
Brand: IBM Pages: 43
IEI Technology BRICK Series Quick Installation Manual preview
BRICK Series
Brand: IEI Technology Pages: 8
IEI Technology PAC-400AI Quick Installation Manual preview
PAC-400AI
Brand: IEI Technology Pages: 7
SilverStone Case Storage Series Manual preview
Case Storage Series
Brand: SilverStone Pages: 28
ViaLite ViaLiteHD HRK3-HB-8 User Manual preview
ViaLiteHD HRK3-HB-8
Brand: ViaLite Pages: 40
Multitech ZDXModemRack EN61000-3-2 Brochure & Specs preview
ZDXModemRack EN61000-3-2
Brand: Multitech Pages: 2
Lindy 38258 User Manual preview
38258
Brand: Lindy Pages: 20
National Instruments cDAQ-9171 Quick Start preview
cDAQ-9171
Brand: National Instruments Pages: 4
ADC Migration Modules DSX-3 Quick Reference Manual preview
Migration Modules DSX-3
Brand: ADC Pages: 2

Brands by name

Popular brands

Load more brands