Cisco ASA 5512-X Page 229 Configuration Manual Download

Page: 229 / 422

8-37

Cisco ASA Series Firewall CLI Configuration Guide

Chapter 8 Inspection for Voice and Video Protocols

History for Voice and Video Protocol Inspection

Feature Name

Releases

Feature Information

SIP, SCCP, and TLS Proxy support for IPv6

9.3(1)

You can now inspect IPv6 traffic when using SIP, SCCP, and
TLS Proxy (using SIP or SCCP).

We did not modify any commands.

SIP support for Trust Verification Services,
NAT66, CUCM 10.5, and model 8831 phones.

9.3(2)

You can now configure Trust Verification Services servers
in SIP inspection. You can also use NAT66. SIP inspection
has been tested with CUCM 10.5.

We added the

trust-verification-server

parameter

command.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Search results

Summary of Contents for ASA 5512-X

Reviews:

Related manuals for ASA 5512-X

Brands by name

Popular brands

Cisco ASA 5512-X, Configuration Manual

Search results

Summary of Contents for ASA 5512-X

Reviews:

Related manuals for ASA 5512-X

Brands by name

Popular brands