manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 315 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 315

 

14-11

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 14      ASA and Cisco Cloud Web Security

  Configure Cisco Cloud Web Security

hostname(config-object-network)# fqdn tools.cisco.com

hostname(config)# access-list SCANSAFE_HTTP extended deny tcp any4 object cisco1 eq 80

hostname(config)# access-list SCANSAFE_HTTP extended deny tcp any4 object cisco2 eq 80

hostname(config)# access-list SCANSAFE_HTTP extended permit tcp any4 any4 eq 80

b.

Create a traffic class for each ACL you defined.

hostname(config)# 

class-map

 

class_name

 

hostname(config-cmap)# 

match access-list

 

acl_name

 

Example

hostname(config)# class-map cws_class1

hostname(config-cmap)# match access-list SCANSAFE_HTTP

hostname(config)# class-map cws_class2

hostname(config-cmap)# match access-list SCANSAFE_HTTPS

Step 3

Create or edit the policy map to redirect the traffic to Cloud Web Security.

a.

Add or edit a policy map that sets the actions to take with the class map traffic. In the default 
configuration, the global_policy policy map is assigned globally to all interfaces. If you want to edit 
the global_policy, enter global_policy as the policy name. You can only apply one policy to each 
interface or globally.

policy-map

 

name

Example: 

hostname(config)# policy-map global_policy

b.

Identify one of the traffic class maps you created for Cloud Web Security inspection.

class 

name

Example: 

hostname(config-pmap)# class cws_class1 

c.

Configure ScanSafe inspection for the class. 

inspect scansafe 

scansafe_policy_map

 [

fail-open

 | 

fail-close

]

Where:

•

scansafe_policy_map

 is the ScanSafe inspection policy map. Ensure that you match the 

protocols in the class and policy maps (both HTTP or HTTPS).

•

Specify 

fail-open

 to allow traffic to pass through the ASA if the Cloud Web Security servers 

are unavailable.

•

Specify 

fail-close

 to drop all traffic if the Cloud Web Security servers are unavailable.

 fail-close

 

is the default.

Example: 

hostname(config-pmap-c)# inspect scansafe cws_inspect_pmap1 fail-open 

Note

If you are editing the default global policy (or any in-use policy) to use a different ScanSafe 
inspection policy map, you must remove the ScanSafe inspection with the 

no inspect 

scansafe

 command, and then re-add it with the new inspection policy map name.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments