Cisco ASA 5512-X, Configuration Manual

Page: 14 / 422

1-8
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 1 Service Policy Using the Modular Policy Framework
Guidelines for Service Policies
inspect ftp
class http
inspect http
Feature Matching for Multiple Service Policies
For TCP and UDP traffic (and ICMP when you enable stateful ICMP inspection), service policies
operate on traffic flows, and not just individual packets. If traffic is part of an existing connection that
matches a feature in a policy on one interface, that traffic flow cannot also match the same feature in a
policy on another interface; only the first policy is used.
For example, if HTTP traffic matches a policy on the inside interface to inspect HTTP traffic, and you
have a separate policy on the outside interface for HTTP inspection, then that traffic is not also inspected
on the egress of the outside interface. Similarly, the return traffic for that connection will not be
inspected by the ingress policy of the outside interface, nor by the egress policy of the inside interface.
For traffic that is not treated as a flow, for example ICMP when you do not enable stateful ICMP
inspection, returning traffic can match a different policy map on the returning interface. For example, if
you configure IPS on the inside and outside interfaces, but the inside policy uses virtual sensor 1 while
the outside policy uses virtual sensor 2, then a non-stateful Ping will match virtual sensor 1 outbound,
but will match virtual sensor 2 inbound.
Guidelines for Service Policies
IPv6 Guidelines
Supports IPv6 for the following features:
• Application inspection for DNS, FTP, HTTP, ICMP, ScanSafe, SIP, SMTP, IPsec-pass-thru, and
IPv6.
•
ASA IPS
• ASA CX
•
ASA FirePOWER
•
NetFlow Secure Event Logging filtering
•
TCP and UDP connection limits and timeouts, TCP sequence number randomization
•
TCP normalization
•
TCP state bypass
• User statistics for Identity Firewall
Class Map (Traffic Class) Guidelines
The maximum number of class maps (traffic classes) of all types is 255 in single mode or per context in
multiple mode. Class maps include the following types:
• Layer 3/4 class maps (for through traffic and management traffic).
•
Inspection class maps
• Regular expression class maps
•
match commands used directly underneath an inspection policy map