manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 48 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 48

 

3-12

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 3      Access Rules

  History for Access Rules

The following example denies traffic with EtherType 0x1256 but allows all others on both interfaces:

hostname(config)# 

access-list nonIP ethertype deny 1256

hostname(config)# 

access-list nonIP ethertype permit any

hostname(config)# 

access-group ETHER in interface inside

hostname(config)# 

access-group ETHER in interface outside

The following example uses object groups to permit specific traffic on the inside interface: 

! 

hostname (config)# 

object-group service myaclog

 

hostname (config-service)# 

service-object tcp source range 2000 3000

hostname (config-service)# 

service-object tcp source range 3000 3010 destinatio$

hostname (config-service)# 

service-object ipsec

hostname (config-service)# 

service-object udp destination range 1002 1006

hostname (config-service)# 

service-object icmp echo

hostname(config)# 

access-list outsideacl extended permit object-group myaclog interface 

inside any

History for Access Rules

Feature Name

Platform 
Releases

Description

Interface access rules

7.0(1)

Controlling network access through the ASA using ACLs.

We introduced the following command: 

access-group

.

Global access rules

8.3(1)

Global access rules were introduced.

We modified the following command: 

access-group.

Support for Identity Firewall

8.4(2)

You can now use identity firewall users and groups for the 
source and destination. You can use an identity firewall 
ACL with access rules, AAA rules, and for VPN 
authentication.

We modified the following commands: 

access-list 

extended

.

EtherType ACL support for IS-IS traffic

8.4(5), 9.1(2)

In transparent firewall mode, the ASA can now pass IS-IS 
traffic using an EtherType ACL.

We modified the following command: 

access-list ethertype 

{

permit

 | 

deny

} 

isis

.

Support for TrustSec

9.0(1)

You can now use TrustSec security groups for the source 
and destination. You can use an identity firewall ACL with 
access rules.

We modified the following commands: 

access-list 

extended

.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments