manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 209 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 209

 

8-17

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 8      Inspection for Voice and Video Protocols

  RTSP Inspection

Verifying and Monitoring MGCP Inspection

The 

show mgcp commands

 command lists the number of MGCP commands in the command queue. The 

show mgcp sessions

 command lists the number of existing MGCP sessions. The 

detail

 option includes 

additional information about each command (or session) in the output. The following is sample output 
from the 

show mgcp

 

commands

 command:

hostname# 

show mgcp commands

1 in use, 1 most used, 200 maximum allowed

CRCX, gateway IP: host-pc-2, transaction ID: 2052, idle: 0:00:07

The following is sample output from the 

show mgcp

 

detail

 command.

hostname# 

show mgcp commands detail

1 in use, 1 most used, 200 maximum allowed

CRCX, idle: 0:00:10

Gateway IP      host-pc-2

Transaction ID  2052

Endpoint name   aaln/1

Call ID         9876543210abcdef

Connection ID   

Media IP        192.168.5.7

Media port      6058

The following is sample output from the 

show mgcp

 

sessions

 command.

hostname# 

show mgcp sessions

1 in use, 1 most used

Gateway IP host-pc-2, connection ID 6789af54c9, active 0:00:11

The following is sample output from the 

show mgcp

 

sessions

 

detail

 command.

hostname# 

show mgcp sessions detail

1 in use, 1 most used

Session active 0:00:14

Gateway IP      host-pc-2

Call ID         9876543210abcdef

Connection ID   6789af54c9

Endpoint name   aaln/1

Media lcl port  6166

Media rmt IP    192.168.5.7

Media rmt port  6058

RTSP Inspection

The following sections describe RTSP application inspection. 

•

RTSP Inspection Overview, page 8-18

•

RealPlayer Configuration Requirements, page 8-18

•

Limitations for RSTP Inspection, page 8-18

•

Configure RTSP Inspection, page 8-19

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments