manualshive.com logo in svg

Cisco Aironet SERIES, Software Manual

Share
Download
Cisco Aironet SERIES Software Manual Download Page 213

 

9-11

Cisco IOS Software Configuration Guide for Cisco Aironet Access Points

OL-14209-01

Chapter 9      Configuring an Access Point as a Local Authenticator

Configuring a Local Authenticator

Using Debug Messages

In privileged exec mode, enter this command to control the display of debug messages for the local 
authenticator:

AP# debug radius local-server 

{ 

client

 | 

eapfast 

| 

error 

|

 packets

}

Use the command options to display this debug information:

•

Use the 

client

 option to display error messages related to failed client authentications.

•

Use the 

eapfast

 option to display error messages related to EAP-FAST authentication. Use the 

sub-options to select specific debugging information:

–

encryption

 —displays information on the encryption and decryption of received and 

transmitted packets

–

events

—displays information on all EAP-FAST events

–

pac

—displays information on events related to PACs, such as PAC generation and verification

–

pkts

—displays packets sent to and received from EAP-FAST clients

•

Use the 

error

 option to display error messages related to the local authenticator.

•

Use the 

packets

 option to turn on display of the content of RADIUS packets sent and received.

Summary of Contents for Aironet SERIES









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands