manualshive.com logo in svg

Cisco Aironet SERIES, Software Manual

Share
Download
Cisco Aironet SERIES Software Manual Download Page 125

 

5-35

Cisco IOS Software Configuration Guide for Cisco Aironet Access Points

OL-14209-01

Chapter 5      Administering the Access PointWireless Device Access

Creating a Banner

To remove a domain name, use the 

no ip domain-name

 

name

 global configuration command. To remove 

a name server address, use the 

no ip name-server

 

server-address

 global configuration command. To 

disable DNS on the wireless device, use the 

no ip domain-lookup

 global configuration command.

Displaying the DNS Configuration

To display the DNS configuration information, use the 

show running-config

 privileged EXEC 

command.

Note

When DNS is configured on the wireless device, the 

show running-config

 command sometimes 

displays a server’s IP address instead of its name.

Creating a Banner

You can configure a message-of-the-day (MOTD) and a login banner. The MOTD banner appears on all 
connected terminals at login and is useful for sending messages that affect all network users (such as 
impending system shutdowns).

The login banner also appears on all connected terminals. It appears after the MOTD banner and before 
the login prompts. 

Note

For complete syntax and usage information for the commands used in this section, refer to the 

Cisco IOS 

Configuration Fundamentals Command Reference for Release 12.3

.

This section contains this configuration information:

•

Default Banner Configuration, page 5-35

•

Configuring a Message-of-the-Day Login Banner, page 5-35

•

Configuring a Login Banner, page 5-37

Default Banner Configuration

The MOTD and login banners are not configured.

Configuring a Message-of-the-Day Login Banner

You can create a single or multiline message banner that appears on the screen when someone logs into 
the wireless device. 

Summary of Contents for Aironet SERIES









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands