Cisco 8841 User Manual Download

Page: 71 / 93

Accessories

Cisco IP Phone 8841/8851 Multiplatform Phones User Guide

Num

Name

Description

1
(cont)

Power and
Call button

Multiple calls:

Press once to put an active call on hold, and to
answer a second incoming call.

Press once to put a current call on hold and press
again to resume a call.

Press and hold for 2 seconds to end the current call
and press again to resume a held call.

Press and hold for 2 seconds to end an active call,
and to answer another incoming call.

Press twice to stay on a current call, and to reject a
second incoming call.

Mute

button

Toggle the microphone on and off. When Mute on the headset
is enabled:

•

The Mute button on the phone lights up.

•

The Mute button on the headset base lights up.
(For Multibase only.)

Volume
button

and

–

Adjust the volume on your headset.

LED

Shows the headset status:

•

Blinking red

—Incoming call.

•

Steady red

—Active call.

•

Flashing white every 6 seconds

—The headset is

paired and idle.

•

Blinking white

—Firmware upgrade is in process or

the headset is pairing with the base station.

Charge Cisco Headset 561 and 562

Use the headset base to charge the headset.

Place the headset into the socket on the base.

The LEDs on the base station indicate the charging status. When the headset is fully charged,
the five LEDs on the base are steady white. If the LEDs don't light up, remove the headset from
the base and try again.

Summary of Contents for 8841






























































































Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands

Cisco 8841, User Manual

Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands