Phone Setup
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
3
Change the Viewing Angle of Your Phone
You can change the angle of the phone to eliminate glare on the screen. If your phone has a
video camera, you can change the angle to improve the camera view.
Use the following steps to change the viewing angle of your phone.
1.
Hold the receiver in the cradle with one hand.
2.
Move the footstand with the other hand to change the angle.
3.
(Optional) Adjust the footstand on the key expansion module and ensure that the
phone and key expansion module are stable.
4.
(Optional) Press
Self-view
to check the camera angle.
Connect to the Network
The 8841/8851 phones must be plugged into the network via an Ethernet cable.
Secure the Phone with a Cable Lock
You can secure your Cisco IP Phone 8841/8851 with a laptop cable lock up to three-quarters of
an inch wide.
Use the following steps to secure the phone with a cable lock.
1.
Take the looped end of the cable lock and wrap it around the object to which you
want to secure your phone.
2.
Pass the lock through the looped end of the cable.
3.
Unlock the cable lock.
4.
Press and hold the locking button to align the locking teeth.
5.
Insert the cable lock into the lock slot of your phone and release the locking
button.
6.
Lock the cable lock.
