Cisco 8841 User Manual Download Page 70

Page: 70 / 93

Accessories

Cisco IP Phone 8841/8851 Multiplatform Phones User Guide

You can connect the Cisco Headset 560 Series with any of the following:

The Cisco Headset 560 Series require Multiplatform Firmware Release 11.2(3) and higher.
Upgrade your phones to the latest firmware before using these headsets.

Use the following steps to check your phone model and the firmware version.

Press the

Applications

button

Select

Status

Product information

Result

: The

Product name

field shows your phone model. The

Software

version

field shows the installed load where you can get the firmware version.

Cisco Headset 561 and 562 Buttons and LED

Your headset buttons are used for basic call features.

Figure 7.

Cisco Headset 561 and 562 Headset Buttons

The following table describes the Cisco Headset 561 and 562 Headset buttons.

Num

Name

Description

Power and
Call button

Use to power the headset on and off.

Press and hold for 4 seconds to power on/off the headset.

Incoming and active call management depend on the number of
calls you have: one (1) or multiple.

One call:

•

Press once to answer incoming calls.

•

Press once to put an active call on hold. Press
again to retrieve the call from hold.

•

Press twice to reject an incoming call.

Summary of Contents for 8841






























































































Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands

Cisco 8841, User Manual

Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands