manualshive.com logo in svg

Cisco 7925G - Unified Wireless IP Phone VoIP, Administration Manual

The Cisco 7925G - Unified Wireless IP Phone VoIP is a versatile communication device perfect for business environments. This sleek and user-friendly phone offers advanced features and seamless connectivity. To harness its full potential, download the free User Manual from our website and unlock its capabilities effortlessly.

Share
Download
background image

Use CSA or ATEX qualified Bluetooth accessories with the Cisco Unified IP Wireless Phone 7925G-EX
in hazardous environments.

Warning

Battery Safety Notices

These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP Phone
manufacturer.

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer

’

s instructions. Statement 1015

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040

Warning

Do not dispose of the battery pack in fire or water. The battery may explode if placed in a fire.

Warning

The battery pack is intended for use only with this device.

Caution

Do not disassemble, crush, puncture, or incinerate the battery pack.

Caution

To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery
contacts.

Caution

Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash
the exposed area with soap and water. If the electrolyte has come in contact with the eye, flush the eye
with water for 15 minutes and seek medical attention.

Caution

Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees
Celsius).

Caution

Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees
Celsius).

Caution

   Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

52

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup

Safety Information

Summary of Contents for 7925G - Unified Wireless IP Phone VoIP



















































































































































































































































































Reviews:

No comments

Related manuals for 7925G - Unified Wireless IP Phone VoIP

Makita DC10WA Instruction Manual preview
DC10WA
Brand: Makita Pages: 8
Makita DC18SE Instruction Manual preview
DC18SE
Brand: Makita Pages: 5
Panasonic LJ-SK56A Installation Manual preview
LJ-SK56A
Brand: Panasonic Pages: 132
Panasonic EY0225 Operating Instructions Manual preview
EY0225
Brand: Panasonic Pages: 52
Panasonic EY-0110 Operating Instructions preview
EY-0110
Brand: Panasonic Pages: 4
Panasonic Toughbook CF-29CTKGZKM User Manual preview
Toughbook CF-29CTKGZKM
Brand: Panasonic Pages: 4
Panasonic Attune WX-Z3040 Operating Instructions Manual preview
Attune WX-Z3040
Brand: Panasonic Pages: 20
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Schumacher Electric SE-82-6-CA Owner'S Manual preview
SE-82-6-CA
Brand: Schumacher Electric Pages: 13
Sistech SIScharger P2 Instruction Manual preview
SIScharger P2
Brand: Sistech Pages: 2
Zendure AB2000 User Manual preview
AB2000
Brand: Zendure Pages: 83
LXE MX7 Reference Manual preview
MX7
Brand: LXE Pages: 60
D-Parts Fontastic Witra User Manual preview
Fontastic Witra
Brand: D-Parts Pages: 2
Watson Pro C-NPF-6B User Manual preview
C-NPF-6B
Brand: Watson Pro Pages: 4
SMA SUNNY ISLAND SIC40-MPT Technical Description preview
SUNNY ISLAND SIC40-MPT
Brand: SMA Pages: 52
Energa C14-10-K Instruction, Use And Maintenance Manual preview
C14-10-K
Brand: Energa Pages: 3
BC BATTERY CONTROLLER BC SMART 5000 Manual preview
BC SMART 5000
Brand: BC BATTERY CONTROLLER Pages: 2
XCHARGE C6AM Series Installation And Operation Manual preview
C6AM Series
Brand: XCHARGE Pages: 41

Brands by name

Popular brands

Load more brands