Procedure
Step 1
Choose the network profile that you want to configure.
Step 2
Under the IP Network Configuration area, choose
Use the following IP addresses and DNS servers
.
Step 3
Enter the required IP addresses. See
Network Configuration Fields When DHCP Not in Use, on page 93
for
descriptions of these fields.
Step 4
Click
Save
to make the change.
Network Configuration Fields When DHCP Not in Use
When DHCP is not in use, the fields listed in the following table need to be statically configured.
Table 21: Network Configuration fields
Description
Static setting
IP address of the phone
IP Address
Subnet mask used by the phone
Subnet Mask
Primary gateway used by the phone
Default Router 1
Primary DNS server used by the phone
Optional backup DNS server used by the phone
DNS Server 1
DNS Server 2
Primary TFTP server used by the phone
Optional backup TFTP server used by the phone
TFTP Server 1
TFTP Server 2
Name of the DNS in which the phone resides
Domain Name
Set Up Alternate TFTP Server
If you use DHCP to direct the phones to a TFTP server, you can also assign an alternative TFTP server to
some phones instead of the one assigned by DHCP.
If you disable DHCP, then you must use these steps to set up the TFTP server for the phone.
Note
To assign an alternate TFTP server to a phone, follow these steps:
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
93
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Set Up Alternate TFTP Server
