manualshive.com logo in svg

Cisco 7925G - Unified Wireless IP Phone VoIP, Administration Manual

The Cisco 7925G - Unified Wireless IP Phone VoIP is a versatile communication device perfect for business environments. This sleek and user-friendly phone offers advanced features and seamless connectivity. To harness its full potential, download the free User Manual from our website and unlock its capabilities effortlessly.

Share
Download
background image

User Voice Messaging System Access

Cisco Unified Communications Manager provides the flexibility to integrate with many different voice
messaging systems, including the Cisco Unity voice messaging system. Because you can integrate with many
different systems, you must provide users with detailed information about how to use your specific system.

You should provide this information to each user:

•

How to access the voice messaging system account.

•

The initial password for accessing the voice messaging system.

Make sure that you have configured a default voice messaging system password for all users.

•

How the phone indicates that messages are waiting.

Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.

For information about setting up the MWI method and the interface to the voice messaging system in
Cisco Unified Communications Manager, see the documentation for your system at this URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

If you are using a Cisco Unity voice messaging system, see the Cisco Unity documentation for your system
for configuring voice messaging and the initial passwords at this URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.html

See the

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide

for information about

accessing the voice messaging system from the phone.

   Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

234

Internal Support Website

User Voice Messaging System Access

Summary of Contents for 7925G - Unified Wireless IP Phone VoIP



















































































































































































































































































Reviews:

No comments

Related manuals for 7925G - Unified Wireless IP Phone VoIP

Telwin 807588 Quick Manual preview
807588
Brand: Telwin Pages: 40
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Euro-Pro XB777 Quick Start Manual preview
XB777
Brand: Euro-Pro Pages: 2
Phonak Combi BTE User Manual preview
Combi BTE
Brand: Phonak Pages: 44
XD COLLECTION P308.46 Series Manual preview
P308.46 Series
Brand: XD COLLECTION Pages: 10
Exibel 38-7362 Instruction Manual preview
38-7362
Brand: Exibel Pages: 5
DeWalt DE9117 Manual preview
DE9117
Brand: DeWalt Pages: 56
Schaudt LAS 1218-2 Manual preview
LAS 1218-2
Brand: Schaudt Pages: 60
Toro PowerPlex Series Operator'S Manual preview
PowerPlex Series
Brand: Toro Pages: 12
Orderman Sol Operating Instructions Manual preview
Sol
Brand: Orderman Pages: 10
Insignia NS-MWPC10K Quick Setup Manual preview
NS-MWPC10K
Brand: Insignia Pages: 2
chinavasion CVQD-S38 How To Use preview
CVQD-S38
Brand: chinavasion Pages: 2
Halo SLEEK 3500 Operating Instructions Manual preview
SLEEK 3500
Brand: Halo Pages: 13
Halo SHINE 3000 Operating Instructions Manual preview
SHINE 3000
Brand: Halo Pages: 13
DWT CS202001 Original Instructions Manual preview
CS202001
Brand: DWT Pages: 48
Compaq IPAQ H3800 White Paper preview
IPAQ H3800
Brand: Compaq Pages: 14
4K5 602.504A Manual preview
602.504A
Brand: 4K5 Pages: 52
Fiamm Premium HF flex Technical Manual preview
Premium HF flex
Brand: Fiamm Pages: 10

Brands by name

Popular brands

Load more brands