Cisco Unified Wireless IP Phone 7925G Series Deployment Guide
70
If using 802.1x authentication via LEAP, EAP-FAST, PEAP or AKM (authenticated key-management) authentication modes,
then a username and password must be configured. AKM mode will use LEAP as the 802.1x method.
•
Select whether to use Dynamic Host Configuration Protocol (DHCP) or configure static IP information.
•
If option 150 or 66 is not configured to provide the TFTP server IP address via the network’s DHCP scope, then enter
the TFTP server IP address info.
•
To enable PEAP with server validation, select
“Validate Server Certificate”
after importing the authentication server
certificate.
•
When using EAP-TLS, select either
“Manufacturing Issued”
or
“User Installed”
for the
“Client EAP-TLS
Certificate”
option after selecting EAP-TLS.
Note:
WEP128 is listed as WEP104 on the Cisco Unified Wireless LAN Controllers.
