Cisco 7925G Series Deployment Manual Download Page 65 | Manualshive

Page: 65 / 111

background image

Cisco Unified Wireless IP Phone 7925G Series Deployment Guide

65

Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled

Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled

Signature Policy
Signature Processing........................... Enabled

To disable the Auto-Immune feature on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter
the following command.

(Cisco Controller) >config wps auto-immune disable

Configuring the WLAN Controller EAP-Request and EAPOL-Key Timeouts

If using EAP, the EAP-Request Timeout on the Cisco Unified Wireless LAN Controller should be set to at least 20 seconds.
In later versions of Cisco Unified Wireless LAN Controller software, the default EAP-Request Timeout was changed from 2 to
30 seconds.
The default timeout on the Cisco ACS server is 20 seconds.
To view the EAP configuration on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter the
following command.

(Cisco Controller) >show advanced eap

EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds)....................

30

EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)......................

1000

EAPOL-Key Max Retries............................ 2

To change the EAP-Request Timeout on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter
the following command.

(Cisco Controller) >config advanced eap request-timeout 30

As of 6.0.182.0 release, the EAPOL-Key Timeout is configurable in milliseconds, where in previous releases it was only
allowed to be configured in seconds.
It is recommended to set the EAPOL_Key timeout to 200 milliseconds.

«
...
63
64
65
66
67
...
»

Summary of Contents for 7925G Series
















































































































Reviews:

No comments

Related manuals for 7925G Series

Brand: Pantech Pages: 97

Brand: Pantech Pages: 52

Brand: Pantech Pages: 2

Brand: Lancom Pages: 50

Scopia XT5000 Series

Brand: RADVision Pages: 184

Brand: Alcatel Pages: 96

Brand: Rath Pages: 8

Brand: QUO Pages: 16

Brand: Yealink Pages: 143

Brand: ZTE-G Pages: 51

Brand: Hanlong Pages: 2

Brand: E-MetroTel Pages: 8

Soundpoint IP550

Brand: Polycom Pages: 4

Brand: UVI Group Pages: 8

Brand: GENERAL MOBILE Pages: 55

Brand: ACN Pages: 51

Brand: Philips Pages: 2

Brand: Philips Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands