Cisco Unified Wireless IP Phone 7925G Series Deployment Guide
91
001e7abb19c8,admin,Cisco
Once the CSV file is imported, the utility will create TFTP downloadable configuration files for each phone, which are exported
to the application install path (C:\Program Files\Cisco Systems\7921BD).
A confirmation window will be displayed when the TFTP downloadable config files have been exported successfully.
The files will be in the format of “WLAN<MAC>.xml”, which the phone does a TFTP get for when it powers on or re-
provisions.
Pushing Configuration Files to the Cisco 792xG
The Bulk Deployment Utility does not have TFTP server capabilities, so a 3
rd
party TFTP server will need to be installed and
have the phone configuration files enabled for TFTP download.
It is recommended to install the TFTP server on the same system where the Bulk Deployment Utility is installed and have a
staging environment setup with the default phone credentials in order for the phone to auto-download the configuration files by
simply powering on the phones.
The staging environment setup, would need to have a single access point with the SSID “cisco” where the security mode is set
to open authentication and option 150 of the DHCP scope for the staging network to be configured to point to the TFTP server
hosting the phone configuration files.
It is not recommended to copy the configuration files to the Cisco Communication Manager’s TFTP server.
Once the Cisco Unified Wireless IP Phone 7925G Series gets its configuration file, then it will re-provision with the new
settings and attempt to join the intended WLAN based on the new credentials received.
The
Bulk Deployment Utility
is available for download on CCO.
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto
Configuring the Local Phone Book and Speed Dials
The Cisco Unified Wireless IP Phone 7925G Series contains local phone book and speed dials support.
As of the 1.4(1) release up to 200 contacts (100 contacts in previous releases).
99 speed dials referenced from the local phone book can be added for quick dial access. Speed dial #1 is reserved for
voicemail.
The left softkey on the home screen can be programmed for
“Message”
to access voice mail or to
“PhBook”
to access the local
phone book.
The local phone book and speed dials can be configured via the local keypad or via the Cisco Unified Wireless IP Phone 7925G
Series web interface. Since the web password is not managed by the user, the web interface is primarily intended for use by the
system administrator, where they can upload information into the phone book for the user. This requires that the
“Phone Book
Web Access”
product specific configuration item be set to
“Allow Admin”
as well as web access set to
“Full”
.
