Cisco Unified Wireless IP Phone 7925G Series Deployment Guide
87
Optionally set additional client parameters as necessary.
When the template has been completely configured, then select
“Export to Wavelink”
under the File menu.
A confirmation will then be displayed after the template has been exported successfully.
After the template has become available, will then need to push the package to the necessary clients.
This can be done on a device group or client level.
To update a single client, right click on it and select
“Update Now”
.
Can also optionally set
“Force package sync during Update Now”
in the client properties.
Using the Bulk Deployment Utility
The Bulk Deployment Utility for the Cisco Unified Wireless IP Phone 7925G Series is intended to help quicken the
provisioning and deployment process of many phones when unique 802.1x accounts are used with EAP-FAST, PEAP (MS-
CHAPv2) or LEAP or if a common set of credentials are used by all phones (i.e. WPA2-PSK or a common 802.1x account).
The utility allows the creation configuration files, which can be exported then enabled for TFTP download by the Cisco Unified
Wireless IP Phone 7925G Series.
This utility does not support certificate provisioning, which would be required in order to support server validation for PEAP or
EAP-TLS.
The utility does allow PEAP to be configured, but without the server validation option.
The Bulk Deployment Utility supports up to 1000 entries per CSV for export. If more than 1000 phones are being deployed,
then multiple CSV files will need to be created and imported.
If doing a bulk export, the username and password is applied to network profile 1 only.
