2-6
Cisco Video Surveillance 6020 IP Camera Installation Guide
OL-28120-02
Chapter 2 Camera Installation
IP Camera Installation
Step 9
Install the black cover.
Step 10
Attach the dome cover to the IP camera base by aligning it with the mounting holes.
Step 11
Use the included screwdriver to tighten the four dome cover screws to secure the dome cover to the
IP camera. Make sure all parts of the IP camera are securely installed.
What to do next
Complete the following procedures:
•
After you install the IP camera, follow the instructions in the
“Performing the Initial Setup of the IP
Camera” section on page 3-1
to access the IP camera through your network.
•
After completing the initial setup, use the IP camera user interface to adjust the focal length and
zoom factor. For more information, see the
“Adjusting the IP Camera Focus and Zoom” section on
page 4-3
.
