B-51
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug platform messaging application
debug platform messaging application
Use the
debug platform messaging application
privileged EXEC command to enable debugging of
application messaging activity. Use the
no
form of this command to disable debugging.
debug platform messaging application
{
all
|
badpak
|
cleanup
|
events
|
memerr
|
messages
|
usererr
}
no debug platform messaging application
{
all
|
badpak
|
cleanup
|
events
|
memerr
|
messages
|
usererr
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform messaging application
command is the same as the
no debug platform
messaging application
command.
Related Commands
all
Display all application-messaging debug messages.
badpak
Display bad-packet debug messages.
cleanup
Display clean-up debug messages.
events
Display event debug messages.
memerr
Display memory-error debug messages.
messages
Display application-messaging debug messages.
usererr
Display user-error debug messages.
Release
Modification
12.1(19)EA1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, see the
Cisco IOS Release 12.2 Configuration Guides
and Command References
>
Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2
>
System Management
>
Troubleshooting and Fault Management
.
