B-13
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug ip dhcp snooping
debug ip dhcp snooping
Use the
debug ip dhcp snooping
privileged EXEC command to enable debugging of DHCP snooping.
Use the
no
form of this command to disable debugging.
debug ip dhcp snooping
{
mac-address
|
agent
|
event
|
packet
}
no debug ip dhcp snooping
{
mac-address
|
agent
|
event
|
packet
}
This command is available only if your switch is running the IP services image, formerly known as the
enhanced multilayer image (EMI).
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug ip dhcp snooping
command is the same as the
no debug ip dhcp snooping
command.
Related Commands
mac-address
Display debug messages for a DHCP packet with the specified MAC address.
agent
Display debug messages for DHCP snooping agents.
event
Display debug messages for DHCP snooping events.
packet
Display debug messages for DHCP snooping.
Release
Modification
12.2(20)SE
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are
enabled. For syntax information, select
Cisco IOS Release 12.2
Configuration Guides and Command References
>
Cisco IOS
Configuration Fundamentals Configuration Guide,
Release 12.2
>
System Management
>
Troubleshooting and
Fault Management
.
