B-73
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug qos-manager
debug qos-manager
Use the
debug qos-manager
privileged EXEC command to enable debugging of the quality of service
(QoS) manager software. Use the
no
form of this command to disable debugging.
debug qos-manager
{
all
|
event
|
verbose
}
no debug qos-manager
{
all
|
event
|
verbose
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug qos-manager
command is the same as the
no debug qos-manager
command.
Related Commands
all
Display all QoS-manager debug messages.
event
Display QoS-manager related-event debug messages.
verbose
Display QoS-manager detailed debug messages.
Release
Modification
12.1(19)EA1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, see the
Cisco IOS Release 12.2 Configuration Guides
and Command References
>
Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2
>
System Management
>
Troubleshooting and Fault Management
.
