B-40
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug platform ip arp inspection
debug platform ip arp inspection
Use the
debug platform ip arp inspection
privileged EXEC command to debug dynamic Address
Resolution Protocol (ARP) inspection events. Use the
no
form of this command to disable debugging.
debug platform ip arp inspection
{
all
|
error
|
event
|
packet
|
rpc
}
no debug platform ip arp inspection
{
all
|
error
|
event
|
packet
|
rpc
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform ip arp inspection
command is the same as the
no debug platform ip arp
inspection
command.
Related Commands
all
Display all dynamic ARP inspection debug messages.
error
Display dynamic ARP inspection error debug messages.
event
Display dynamic ARP inspection event debug messages.
packet
Display dynamic ARP inspection packet-related debug messages.
rpc
Display dynamic ARP inspection remote procedure call (RPC) request debug
messages.
Release
Modification
12.2(20)SE
This command was introduced.
Command
Description
show inventory
Displays the dynamic ARP inspection configuration and operating state.
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, select
Cisco IOS Release 12.2 Configuration Guides
and Command References
>
Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2
>
System Management
>
Troubleshooting and Fault Management
.
