2-98
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
OL-12191-01
Chapter 2 Message and Recovery Procedures
SWITCH_QOS_TB Messages
SWITCH_QOS_TB Messages
This section contains the QoS trusted boundary (TB) messages.
Error Message
SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: [chars] detected on port
[chars], port's configured trust state is now operational.
Explanation
A trusted boundary detected a device matching the trusted device setting for the port and
has modified the port trust state. The first [chars] is the trusted device, and the second [chars] is the
port.
Recommended Action
No action is required.
Error Message
SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: [chars] no longer detected on port
[chars], operational port trust state is now untrusted.
Explanation
A trusted boundary lost contact with a trusted device and has set the port trust state to
untrusted. The first [chars] is the trusted device, and the second [chars] is the port
Recommended Action
No action is required.
SW_VLAN Messages
This section contains the VLAN manager messages. The VLAN manager receives information from the
VTP and enables the proper VLAN membership on all interfaces through the port manager.
Error Message
SW_VLAN-3-MALLOC_FAIL: Failed to allocate [dec] bytes
Explanation
Memory allocation failed. [dec] is the number of bytes.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error using the Output Interpreter. Use the Bug Toolkit to look
for similar reported problems. If you still require assistance, open a case with the TA C, or contact
your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports” section on page 1-6
.
Error Message
SW_VLAN-3-VLAN_PM_NOTIFICATION_FAILURE: VLAN Manager synchronization
failure with Port Manager over [chars].
Explanation
The VLAN manager dropped a notification from the port manager because of a lack of
ready pool space. [chars] is the type of port manager notification.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
