manualshive.com logo in svg

Cisco 30 VIP, Troubleshooting Manual

Get the Cisco 30 VIP Troubleshooting Manual for your network setup assistance. This comprehensive manual is available for free download at manualshive.com. Gain instant access to a valuable resource packed with step-by-step instructions and troubleshooting solutions to maximize the potential of your Cisco 30 VIP product.

Share
Download
background image

 

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1) 

 

© 2000 Cisco Systems, Inc.    

 

                         94 

Dial plan ................................................ 37 
Feature issues ........................................ 31 
Initialization .......................................... 55 
Intra-cluster call flow ............................ 59 
KeepAlive process ................................ 58 
Locations ............................................... 32 
MTP resources ...................................... 35 
Partitions ............................................... 38 
Registration process .............................. 57 
Security ................................................. 40 
Transcoding resources........................... 33 

Cisco CallManager Administration Details

............................................................... 10 

Cisco IOS Gatekeeper 

Debug message and show commands ... 66 

Cisco IOS Gateway 

Case study ............................................. 63 
Debug messages and show commands . 67 
T1/CAS interface .................................. 71 
T1/PRI interface .................................... 70 

Cisco IP Phone 

Case study ....................................... 50, 63 
Initialization process ............................. 50 

Cisco IP Phone 7960 

i button help........................................... 24 

Cisco Technical Assistance Center (TAC) 92 
Cluster (definition) ...................................... 6 
CMR (definition)......................................... 6 
CODEC (definition) .................................... 6 
Codec mismatch ........................................ 31 
Codec Types 

CDRs ..................................................... 89 

Communication 

H.323 inter-cluster................................. 73 

Conference Bridge..................................... 32 
Crackling ................................................... 25 

D 

DCF (definition).......................................... 6 
D-Channel (definition) ................................ 6 
Debug Messages 

Cisco IOS Gatekeeper ........................... 66 
Cisco IOS Gateway ............................... 67 

Details 

Cisco CallManager Administration....... 10 

DHCP (definition) ....................................... 6 

Diagnostic CDRs........ See Call Management 

Records (CMR) 

Dial Plan.................................................... 37 
Distorted Audio Problem .......................... 21 
DN (definition)............................................ 6 
DNIS (definition) ........................................ 7 
DNS (definition).......................................... 7 
Domino Analyzer ...................................... 18 
Dropped Calls............................................ 28 
DRQ (definition) ......................................... 7 
DTMF (definition)....................................... 7 

E 

Echo........................................................... 25 
Event Viewer............................................. 12 

Detailed information about ................... 13 
Opening ................................................. 12 

F 

Failed Call Flow ........................................ 75 
Feature Issues ............................................ 31 
Flow (definition) ......................................... 7 
Full duplex (definition) ............................... 7 

G 

G.711 (definition)........................................ 7 
G.729 (definition)........................................ 7 
Gatekeeper................................................. 48 

Admission rejects (ARJ) ....................... 48 
Inter-cluster trunks only ........................ 48 
Registration rejects (RRJ) ..................... 49 

Gateway 

Registration problems ........................... 43 
Reorder tone .......................................... 42 

Glossary....................................................... 6 

H 

H.225 (definition)........................................ 7 
H.245 (definition)........................................ 7 
H.323 (definition)........................................ 7 
H.323 Communication 

Inter-cluster ........................................... 73 

Half Duplex (definition).............................. 7 
Help 

Cisco IP Phone 7960 i button................ 24 

Summary of Contents for 30 VIP

































































































Reviews:

No comments

Related manuals for 30 VIP

Handspring Treo 270 Specification Sheet preview
Treo 270
Brand: Handspring Pages: 2
palmOne Treo 600 Getting Started Manual preview
Treo 600
Brand: palmOne Pages: 14
Yealink Yealink SIP-T48G Quick Reference Manual preview
Yealink SIP-T48G
Brand: Yealink Pages: 9
Yealink Yealink SIP-T42G Quick User Manual preview
Yealink SIP-T42G
Brand: Yealink Pages: 2
T-Mobile Pulse Mini User Manual preview
Pulse Mini
Brand: T-Mobile Pages: 191
SLIDE SP5513 Quick Start Manual preview
SP5513
Brand: SLIDE Pages: 32
golmar T-540 PLUS SE Quick Manual preview
T-540 PLUS SE
Brand: golmar Pages: 2
Alcatel ONE TOUCH Fierce Manual preview
ONE TOUCH Fierce
Brand: Alcatel Pages: 15
Yealink SIP-T30 Quick Start Manual preview
SIP-T30
Brand: Yealink Pages: 28
Doro PHONEEASY 505 Manual preview
PHONEEASY 505
Brand: Doro Pages: 48
Grandstream Networks GXP3000 User Manual preview
GXP3000
Brand: Grandstream Networks Pages: 56
Qualitel KTF4-IP User Manual preview
KTF4-IP
Brand: Qualitel Pages: 93
i-mobile i-Style 7.7 User Manual preview
i-Style 7.7
Brand: i-mobile Pages: 78
Samsung Highnote User Manual preview
Highnote
Brand: Samsung Pages: 223
Samsung I425 User Manual preview
I425
Brand: Samsung Pages: 101
Samsung Heaven SCH-U320 User Manual preview
Heaven SCH-U320
Brand: Samsung Pages: 174
Samsung i640 Service Manual preview
i640
Brand: Samsung Pages: 108
Samsung Gusto SCH-U360 Manual Del Usuario preview
Gusto SCH-U360
Brand: Samsung Pages: 152

Brands by name

Popular brands

Load more brands