2-27
Catalyst 2970 Switch Hardware Installation Guide
OL-6422-01
Chapter 2 Switch Installation
Connecting to the 10/100/1000 Ports
Figure 2-22
Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade
Screwdriver
Step 4
Grasp the SFP module between your thumb and index finger, and carefully
remove it from the module slot.
Step 5
For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP
module to keep the optical interfaces clean.
Step 6
Place the removed SFP module in an antistatic bag or other protective
environment.
Connecting to the 10/100/1000 Ports
The switch 10/100/1000 ports configure themselves to operate at the speed of
attached devices. If the attached ports do not support autonegotiation, you can
explicitly set the speed and duplex parameters. Connecting devices that do not
autonegotiate or that have their speed and duplex parameters manually set can
reduce performance or result in no linkage.
1
Bale clasp
24
Catalyst 2970
SERIES
23
24
25
26
27
28
97410
1
Summary of Contents for 2970 - Catalyst Switch
Page 4: ......
