Chapter 2 Switch Installation
Preparing for Installation
2-2
Catalyst 2970 Switch Hardware Installation Guide
OL-6422-01
Warnings
These warnings are translated into several languages in the
Regulatory
Compliance and Safety Information for the Catalyst 2970 Switch
document that
shipped with the switch.
Warning
Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.
Statement 100C
Warning
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Statement 1030
Warning
Read the installation instructions before connecting the system to the power
source.
Statement 1004
Warning
Before working on equipment that is connected to power lines, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals.
Statement 43
Warning
Do not stack the chassis on any other equipment. If the chassis falls, it can
cause severe bodily injury and equipment damage.
Statement 48
Warning
The plug-socket combination must be accessible at all times, because it serves
as the main disconnecting device.
Statement 1019
Warning
This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use.
Statement 39
Summary of Contents for 2970 - Catalyst Switch
Page 4: ......
