3-47
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Chapter 3 Installation
Connecting to GBIC Module Ports
Connecting to 1000BASE-T GBIC Module Ports
After installing the 1000BASE-T GBIC in the GBIC module slot, follow these
steps:
Caution
To prevent ESD damage, follow your normal board and component handling
procedures.
Step 1
When connecting to servers, workstations, and routers, insert a four twisted-pair,
straight-through cable in the RJ-45 connector. When connecting to switches or
repeaters, insert a four twisted-pair, crossover cable (see
Figure 3-39
).
Note
When connecting to a 1000BASE-T device, be sure to use a four twisted-pair,
Category 5 cable.
Figure 3-39 Connecting to a 1000BASE-T GBIC Port
Catalyst 2950
SERIES
1
2
65297
