Chapter 3 Installation
Installing the Switch on a Table, Shelf, or Desk
3-22
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Attaching the Optional Cable Guide
We recommend attaching the cable guide to prevent the cables from obscuring the
front panels of the switch and other devices installed in the rack. Use the supplied
black Phillips machine screw to attach the cable guide to the left or right bracket,
as shown in
Figure 3-17
.
Note
You cannot use the cable guide with Catalyst 2950 LRE switches.
Figure 3-17 Attaching the Cable Guide
Installing the Switch on a Table, Shelf, or Desk
Before placing the switch on a table, shelf, or desk, locate the adhesive strip with
rubber feet in the mounting-kit envelope, and attach four rubber feet to the
recessed areas on the switch bottom. Place the switch on a table, shelf, or desk
near an AC power source or DC-input power source.
Start the terminal-emulation software and provide power to the switch. See
Chapter 1, “Quick Installation,”
for instructions.
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
10Base-T / 10
0Base-TX
Catalyst 2950
SERIES
45573
Cable guide screw
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
13x
14x
15x
16x
17x
18x
19x
20x
21x
22x
23x
24x