1-3
Cisco Video Surveillance PTZ IP Camera Installation Guide
OL-28954-01
Chapter 1 Overview
PTZ IP Camera Physical Details
PTZ IP Camera Physical Details
Figure 1-1
and the table that follows describe the outer view of the PTZ IP camera.
Figure 1-1
Outer View of the PTZ IP Camera
Figure 1-2
and the table that follows describe the inner view of the PTZ IP camera.
Reset Button
Recessed button that reboots the PTZ IP camera or resets it to
a default state. You can use a pin or paper clip to depress it.
Depending on how long you depress the reset button, you can
do either of the following:
•
Reset—Press and release the reset button. Wait for the
PTZ IP camera to reboot.
•
Restore—Press and hold the reset button for about 30
seconds. All settings are restored to the factory defaults.
Network LED
Status of the network to which the camera is attached.
Status LED
Status of the PTZ IP camera. For more information, see
Table 1-1
.
Lens
Lens that pans, tilts and zooms.
Lens
Status LED
Network LED
Reset Button
This drawing shows a camera with its dome
cover removed.
347712
