VCC-SXCXP3R Rev. 905-0050-00
©2017 CIS Corporation. All rights reserved.
8
7.
Camera Operational Mode
7.1
Link Configuration
Transfer Control
CxpLinkConfiguration
CXP1_X1
CXP2_X2
CXP3_X3
7.2
Pixel Format
ImageFormatControl
PixelFormat
Bayer RG8
Bayer RG10
7.3
Camera Sync Mode
・
TriggerSelectorAndActivation
AquisitionMode
：
Internal sync mode (Free run mode)
FrameStartRisingEdge
：
External trigger sync mode (Fixed trigger shutter mode: rising edge)
FrameStartFallingEdge
：
External trigger sync mode (Fixed trigger shutter mode: falling edge)
FrameStartLevelHigh
：
External trigger sync mode (Pulse width trigger shutter mode: High active)
FrameStartLevelLow
：
External trigger sync mode (Pulse width trigger shutter mode: Low active)
FrameBurstStart
：
Internal sync mode (Burst mode of sequence function)
・
TriggerSource
This is to set how to input triggers of external trigger sync mode.
CXP_Host
：
This is to use Low Speed uplink of CoaXPress to input triggers via coaxial cable connected to a frame grabber
board.
LineIn
：
This is to input triggers via No. 5 pin of the 6pin circular connector of the camera rear.
・
TriggerSoftware
This command is to generate a trigger in the camera and capture image for 1 frame. Please note that the trigger timing
is not so accurate like the one generated by TriggerSource. The Acquisition Control mode which can be used are only
TriggerSelectorAndActivation
--- FrameStartRisingEdge mode.
Acquisition Control
TriggerSelectorAndActivation
AquisitionMode
FrameStartRisingEdge
FrameStartFallingEdge
FrameStartLevelHigh
FrameStartLevelLow
FrameBurstStart
TriggerSource
LinkTrigger0
Line0
TriggerSoftware
(Execute)
