VCC-SXCXP3R Rev. 905-0050-00
©2017 CIS Corporation. All rights reserved.
17
8.8 Test Pattern
AcquisitionControl
TestImageMode
On/Off
Test pattern can be output from the camera. It is useful to check if your system is operation properly.
8.9 LED Indicator
DeviceControl
DeviceIndicatorMode
Active
ErrorStatus
Inactive
・
Active
: Indicate communication status of CoaXPress.
・
ErrorStatus :
Light only when there was an error in the communication status.
・
Inactive
:
All LED OFF.
Lighting patterns of LED when it is set to active are as follows. It shows the camera status by the way of its
lighting.
Lighting Status
Camera Status
OFF
No PoCXP Supplied
Green Slow Blinking
[0.5Hz]
Confirmed connection of the device and
the host.
Green
Lighting
Transmitting video data.
Orange Slow Blinking
[1Hz]
Waiting for a trigger input.
Red Fast Blinking
System error occurred.
※
There could be some cases that LED Red blinks to show system error, even though its operation is normal.
This can happen if the camera recognized an error in any occasion such as when a trigger was input at the
prohibited timing, and when ROI or sub-sampling was changed with keep grabbing video output. This is because
error indication status was kept since those errors occurred. To restore this to normal LED lighting status, reboot
the camera, or execute Device Control—SensorReset
Indicator LED
