VCC-FC60FR19CL
Rev.900-729-31-00
©2011 CIS Corporation. All rights reserved.
13
6.
External Connector Pin Assignment
6.1.
12 pins Circular Connector HR10-10R-12PA (HIROSE) equivalent
*1. General Purpose Input 1
Via 12pins connector, full frame scan mode and partial scan mode can be switched.
Input Signal
Function
L or
NA
: Full Frame Scan Mode
H
: Partial Scan Mode
Set the resistor address 015 to data 0 (full frame scan mode).
When data 1 (partial scan mode) is set to the resistor address 015, 12pins connector control will be
invalid.
*2. General Purpose Output 1
～
4
The following output signals can be selected by serial communication commands.
Output Signals
Address
Data
Output 1
034
0:
HD
output
Output 2
035
1:
FVAL
output
Output 3
036
2:
Exposure output
Output 4
037
3:
TRIG Input EN output
Pin No.
Initial Settings
1
GND
2
Power Input (DC+12V)
3
GND
4
General Purpose Input 1
Full frame scan / Partial scan *1
5
GND
6
General Purpose Output 1 HD output
(Address 034, data 0)*2
7
General Purpose Output 2 FVAL output
(Address 035, data 1)*2
8
GND
9
General Purpose Output 3 Exposure output
(Address 036, data 2)*2
10
General Purpose Output 4 TRIG Input EN output
(Address 037, data 3)*2
11
Trigger Input
12
GND
