![background image](http://html1.mh-extra.com/html/cis/cis-nw-poe/cis-nw-poe_user-manual_2608734017.webp)
17
Enabled
Check this box to activate the rule.
Chain
Set to
dstnat
Dst. Address
The Dst. Address is your public IP address. It will be automatically updated.
Protocol
Select TCP or UDP based on which port you need to open.
Dst. Port
Enter the port(s) to open. You can enter a range (e.g., 5000-6000) or separate
multiple ports with commas (e.g., 80, 443, 3389).
Action
Set to
dst-nat
.
To Addresses
Enter the IP address of the device on your network.
To ports
Optional. If you wish for the traffic to be forwarded to a different port on the device,
enter it here.
Comment
The comment must be set to
Port-Forward
or the rule will not work!
The comment must end with
“Port
-
Forward”
for the rule to work!
Summary of Contents for CIS-NW-POE
Page 1: ...CIS NW POE User Manual...
Page 6: ...6 Quick Setup...