22
PoE Information and Settings
PoE-Out Modes:
Auto-on mode (default)
When selected, auto-on mode checks for resistance on the host device and will automatically supply
power to devices that require it. It will not damage non-PoE devices.
Forced-on mode
When selected, the router applies power on pins 4,5 (+) and 7,8 (-), even if no cable is attached.
Be careful plugging non-PoE devices into a port when Forced-on is selected.
You may damage your
device!
Off mode
When selected, the router will not supply power to connected devices.
PoE-Out limitations
The CIS-NW-POE provides up to 450mA for each port, with a maximum total output of 2A.
Enable/Disable PoE on a Specific Port
Select the port from the
Interfaces
tab. Change the PoE Out option accordingly.
Summary of Contents for CIS-NW-POE
Page 1: ...CIS NW POE User Manual...
Page 6: ...6 Quick Setup...
